Third Millennium Systems Ltd. © 2023 All rights reserved. All trademarks are the property of their respective owners. 3123A
‘MIFARE’, ‘MIFARE Classic’ and ‘MIFARE DESFire EV2’ are trademarks of NXP B.V. ‘LEGIC advant’ is a trademark of LEGIC Identsystems The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG Inc., and any use of such marks by Third Millennium Systems Ltd., is under licence.
reader credential solutions A range of readers, access technologies and credentials available for your project
RFID RFID RFID RFID RFID RFID

readers available to this technology

Widely used 125kHz Proximity technologies Our 125kHz Proximity readers are capable of supporting: KANTECH compatible FARPOINTE compatible AWID compatible EM variants CASI compatible
Square profile with PIN entry to fit a UK or EU electrical back box.
Slim, square profile to fit a UK or EU electrical back box.
1 2 3 4 5 6 7 8 9 # 0 *
Narrow, slim profile to replace magnetic stripe reader.
Slim footprint to fit UK, EU or single gang US back box.
Slim footprint with PIN entry to fit UK, EU or single gang US back box.
Sleek and compact mullion style.
1 2 3 4 5 6 7 8 9 # 0 * 125kHz  PC03
Passive 125 kHz proximity readers work by constantly emitting a short range radio frequency field. When a proximity card comes within the range of the emitted RF field of the control reader, the embedded integrated chip in the card is powered up, and transmits a card number back to the reader. An advantage of the 125 kHz reader / card solution, is that due to the lower power requirements and small amount of data transmitted, a good read range of up to 100mm (4 inches) is usually achieved, allowing users to get a fast and successful read.
All our readers are fully configurable to your requirements, and using our Reader Credential Solutions we can offer and supply an integrated package to your security project of RFID technologies, control readers and access card solutions.
125kHz Proximity
CREDENTIAL SOLUTIONS

Standard reader/credential

configuration with this technology.

contact us

+44 (0) 1495 751 992
RFID RFID
Flush, panel-mount reader.
Flush mounted ligature and vandal resistant reader.
card readers for network door controllers
3123A
Third Millennium Systems Ltd. © 2023 All rights reserved. All trademarks are the property of their respective owners.
MIFARE’, ‘MIFARE Classic’ and ‘MIFARE DESFire EV2’ are trademarks of NXP B.V. ‘LEGIC advant’ is a trademark of LEGIC Identsystems The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG Inc., and any use of such marks by Third Millennium Systems Ltd., is under licence.

readers available to this technology

RFID RFID RFID RFID RFID RFID
Square profile with PIN entry to fit a UK or EU electrical back box.
Slim, square profile to fit a UK or EU electrical back box.
1 2 3 4 5 6 7 8 9 # 0 *
Narrow, slim profile to replace magnetic stripe reader.
Slim footprint to fit UK, EU or single gang US back box.
Slim footprint with PIN entry to fit UK, EU or single gang US back box.
Sleek and compact mullion style.
1 2 3 4 5 6 7 8 9 # 0 *
All our readers are fully configurable to your requirements, and using our Reader Credential Solutions we can offer and supply an integrated package to your security project of RFID technologies, control readers and access card solutions.
CREDENTIAL SOLUTIONS
CREDENTIAL SOLUTIONS

Standard reader/credential

configuration

with this technology.

Passive 125 kHz proximity readers work by constantly emitting a short range radio frequency field. When a proximity card comes within the range of the emitted RF field of the control reader, the embedded integrated chip in the card is powered up, and transmits a card number back to the reader. An advantage of the 125 kHz reader / card solution, is that due to the lower power requirements and small amount of data transmitted, a good read range of up to 100mm (4 inches) is usually achieved, allowing users to get a fast and successful read.
125kHz Proximity
Widely used 125kHz Proximity technologies Our 125kHz Proximity readers are capable of supporting: KANTECH compatible FARPOINTE compatible AWID compatible EM variants CASI compatible
125kHz  PC03

contact us

+44 (0) 1495 751 992
RFID RFID
Flush, panel-mount reader.
Flush mounted ligature and vandal resistant reader.
card readers for network door controllers