Third Millennium Systems Ltd. © 2020 All rights reserved. All trademarks are the property of their respective owners. 2784-R
stay connected
Passive 125 kHz proximity readers work by constantly emitting a short range radio frequency field. When a proximity card comes within the range of the emitted RF field of the control reader, the embedded integrated chip in the card is powered up, and transmits a card number back to the reader. An advantage of the 125 kHz reader / card solution, is that due to the lower power requirements and small amount of data transmitted, a good read range of up to: 100mm (4 inches) is usually achieved, allowing users to get a fast and successful read.
125 kHz PROXIMITY
The following CARD READERS and RFID credentials offer standard configuration with this access technology.
PROXIMITY 125 kHz
HID® Proximity compatible + widely used 125kHz Proximity technologies
Our 125kHz Proximity readers are capable of supporting: HID® Proximity Compatible KANTECH Compatible FARPOINTE Compatible AWID Compatible EM Variants CASI Compatible
credentials used with these readers RX1 RX1K RX3 RX3K RX4 RX2 third millennium
technologies offering the widest range of access control solutions
technology
credentials
access control readers
reader credential solutions
Third Millennium Systems Ltd. © 2020 All rights reserved. All trademarks are the property of their respective owners. 2784-Q
PROXIMITY 125 kHz PROXIMITY 125 kHz
The following CARD READERS and RFID credentials offer standard configuration with this access technology.
RX1 RX1K RX3 RX3K RX4 RX2
credentials used with these readers credentials used with these readers
HID® Proximity compatible +
Our 125KHz Proximity readers are capable of supporting: HID® Proximity compatible KANTECH compatible FARPOINTE compatible AWID compatible EM variants CASI compatible and other widely used 125KHz Proximity technologies
third millennium
technologies offering the widest range of access control solutions
technology
credentials
access control readers
reader credential solutions
Passive 125 kHz proximity readers work by constantly emitting a short range radio frequency field. When a proximity card comes within the range of the emitted RF field of the control reader, the embedded integrated chip in the card is powered up, and transmits a card number back to the reader. An advantage of the 125 kHz reader / card solution, is that due to the lower power requirements and small amount of data transmitted, a good read range of up to: 100mm (4 inches) is usually achieved, allowing users to get a fast and successful read.
info@tm-readers.com
+44 (0) 1495 751 992