Third Millennium Systems Ltd. © 2020 All rights reserved. All trademarks are the property of their respective owners. F 2784-T
stay connected
Product Review The RXswitch is not an RFID reader, but an electronic unit designed to work seamlessly with the RX series of advanced access control readers. The switch unit will separate multiple card technologies into individual data feeds for independent access control systems within a multi-tenanted environment. Usually RX series readers and RX switches are installed at the building turnstiles. The various tenant card technologies are filtered and then sent to the corresponding tenant access control system. Please be aware the tenant is responsible for managing who may enter the building on their behalf. NOTE: The RXswitch may be ‘stacked’ to offer up to 4 multiples of 4 tenants (or zones) within a building. Open and check the RXswitch / stacking information sheet, which shows the wiring setup to accommodate up to 16 tenants.
Registered Partner MIFARE Classic® MIFARE®DESFire® CSN or Sector data prime / advant P A R T N E R
R
x
‘MIFARE’, ‘MIFARE Classic’ and ‘MIFARE DESFire EV2’ are trademarks of NXP B.V.
datasheet third millennium
products interface technology
Third Millennium Systems Ltd. © 2020 All rights reserved. All trademarks are the property of their respective owners. F 2784-T
‘MIFARE’, ‘MIFARE Classic’ and ‘MIFARE DESFire EV2’ are trademarks of NXP B.V.
R
x
datasheet Registered Partner MIFARE Classic® MIFARE®DESFire® CSN or Sector data prime / advant P A R T N E R third millennium
products card readers for network door controllers
Product Review The RXswitch is not an RFID reader, but an electronic unit designed to work seamlessly with the RX series of advanced access control readers. The switch unit will separate multiple card technologies into individual data feeds for independent access control systems within a multi-tenanted environment. Usually RX series readers and RX switches are installed at the building turnstiles. The various tenant card technologies are filtered and then sent to the corresponding tenant access control system. Please be aware the tenant is responsible for managing who may enter the building on their behalf. NOTE: The RXswitch may be ‘stacked’ to offer up to 4 multiples of 4 tenants (or zones) within a building. Open and check the RXswitch / stacking information sheet, which shows the wiring setup to accommodate up to 16 tenants.
info@tm-readers.com
+44 (0) 1495 751 992