Third Millennium Systems Ltd. © 2020 All rights reserved. All trademarks are the property of their respective owners. 2784-R
stay connected
Product Review The OC1 advanced access control interface is not an RFID reader, but provides an OSDP Secure communications link to a compatible Third Millennium OSDP reader. The OC1 (and OSDP compatible reader) reuse existing reader cabling to minimise installation cost, and will eliminate the security vulnerability of the traditional Wiegand interface between an access control reader and the control panel. Mounted close to the control panel, the OC1 provides a compatible Wiegand output to allow the security of an access control system to be upgraded cost-effectively. The integrated RGB LED provides a visual indication of the state of the link between the OC1 and the reader. Interfacing The OC1 communicates using OSDP Secure to the reader over an existing reader cable, and outputs the card data to an access control panel. In addition to the Wiegand output from the OC1, a flexible interface is also provided to control the LED and buzzer at the reader.
Registered Partner MIFARE Classic® MIFARE®DESFire® CSN or Sector data prime / advant P A R T N E R
o
c
1
datasheet
‘MIFARE’, ‘MIFARE Classic’ and ‘MIFARE DESFire EV2’ are trademarks of NXP B.V.
third millennium
products interface technology
Third Millennium Systems Ltd. © 2020 All rights reserved. All trademarks are the property of their respective owners. 2784-Q
‘MIFARE’, ‘MIFARE Classic’ and ‘MIFARE DESFire EV2’ are trademarks of NXP B.V.
Registered Partner MIFARE Classic® MIFARE®DESFire® CSN or Sector data prime / advant P A R T N E R
o
c
1
datasheet third millennium
products card readers for network door controllers
Product Review The OC1 advanced access control interface is not an RFID reader, but provides an OSDP Secure communications link to a compatible Third Millennium OSDP reader. The OC1 (and OSDP compatible reader) reuse existing reader cabling to minimise installation cost, and will eliminate the security vulnerability of the traditional Wiegand interface between an access control reader and the control panel. Mounted close to the control panel, the OC1 provides a compatible Wiegand output to allow the security of an access control system to be upgraded cost-effectively. The integrated RGB LED provides a visual indication of the state of the link between the OC1 and the reader. Interfacing The OC1 communicates using OSDP Secure to the reader over an existing reader cable, and outputs the card data to an access control panel. In addition to the Wiegand output from the OC1, a flexible interface is also provided to control the LED and buzzer at the reader.
info@tm-readers.com
+44 (0) 1495 751 992